Capture brilliant images of the aquatic world with your Sony Alpha 1 or a7S III mirrorless camera in Ikelite's 200DL Underwater Housing with Dry Lock Port Mount, which has a depth rating of 200'. An Ikelite bulkhead with a manual hot shoe connection enables reliable electrical triggering of optional external strobes via sync cords. The use of an optional TTL hot shoe and converter will allow for TTL operation with compatible Ikelite DS strobes; non-Ikelite strobes will still work in manual mode only.
Ergonomic, mechanical push buttons, dials, and levers afford access to all important camera functions. Built for durability, the enclosure is made in the USA from a corrosion-resistant ABS plastic and polycarbonate blend. It is white on the front, top, sides, and bottom, but clear in the back to allow you to monitor the O-ring seal and maintain your view of the camera's rear controls. The supplied aluminum tray with a left-hand quick release grip affords improved balance and handling while offering an attachment point for an optional lighting arm.
Depth Rating: 200' / 60 m
Control Type Mechanical Push Buttons, Dials, and Levers
Controls: All Camera Controls except Diopter Adjustment, Focus Mode Dial (a1); Joystick Up/Down/Left/Right (Joystick Can Be Depressed); Control Wheel: Control Wheel Functions May Be Accessed Using Front and Rear Dials
Material of Construction: Housing: ABS Plastic and Polycarbonate Blend
Tray and Handle: Aluminum
Lens Port: Dry Lock Port Mount
Buoyancy: Slightly Positive in Fresh Water
External Flash Connector: Ikelite ICS-5 Manual Bulkhead for Optional Strobes
Mounting: 1/4"-20 Threaded Holes above Lens Port Mount and on Mounting Plate and Tray
1/2-20 Threaded Accessory Port
Dimensions: 9.0 x 7.3 x 6.0" / 22.9 x 18.4 x 15.2 cm
Weight: Housing: 4.7 lb / 2.1 kg
Tray with Left Handle: 11 oz / 312 g
Includes the following modular ports. Add $20 if both flat and dome ports are needed:
750.20 [ ]
750.28 [ ]
750.42 [ ]
750.50 [ ]
Dome Port [ ]
Flat Port [ ]
By renting this item I agree to these additional terms and conditions:
1. I have been briefed by the staff on the operation, limitations and basic care of this system.
2. Lens ports come assembled based on my previously indicated preferences. Re-configuration is at my own risk.
3. Casing is free of cracks and ports free of major scratches. If any cracks on the case or major scratches found that affect image quality, I will be liable for full replacement cost of the affected part.