Sporting both 3G-SDI and HDMI connections, the Storm 1000S Wireless Kit from Vaxis enables transmitting visually lossless video signals to the Vaxis receiver with less than 1 ms latency. The transmitter sends a powerful line-of-sight signal up to 1148' and offers 20 channels through the 20 and 40 MHz bands, allowing you to find a clean channel to use. This also allows you to work with multiple pairs of Vaxis Storm transmitters and receivers without interfering with each other's signals.
The transmitter features one 3G-SDI input, one 3G-SDI loop output, and one HDMI input while the receiver has two 3G-SDI and one HDMI outputs. The system supports 0' mode, which allows instantaneous playback with an ALEXA Mini. The transmitter supports multicasting to multiple receivers, and in addition, the Storm 1000S is compatible with Storm 058, 800, 2000, and 5000 systems. Each unit features a bright, clear LCD display and they have a cooling fan that vents to the side to avoid overheating your camera or monitor. They can be powered using the integrated 2-pin LEMO connector. In addition the receiver features an integrated V-mount plate for power input.
Transmitter: 1 x BNC (3G-SDI) Input
Transmitter: 1 x BNC (3G-SDI) Loop Output
Transmitter: 1 x HDMI Type A Input
Receiver: 2 x BNC (3G-SDI) Output
Receiver: 1 x HDMI Type A Output
1 x 2-Pin LEMO Input
Transmitter: 1 x Micro-USB Input
Receiver: 1 x 2-Pin LEMO Input
Receiver: 1 x Micro-USB Input
Wireless Range: 1148.3' / 350 m (Line-of-Sight)
# of Channels: 20
Frequency Range: 5.1 to 5.9 GHz
Latency: < 1 ms
DC Input Power: 7 to 36 VDC
Battery Type: Receiver: 1 x V-Mount
Mounting: 1 x 1/4"-20 Female
Transmitter: 5.4 x 2.7 x 1" / 138 x 69.5 x 24.5 mm
Receiver: 6.1 x 3.6 x 1" / 156 x 91.5 x 24.5 mm
Transmitter: 10.2 oz / 290 g
Receiver: 15.3 oz / 435 g
Comes with 1x Transmitter, 1x Receiver, 2x Lemo to D-Tap cable, 2x SDI short patch, 1x 1/4" mounting screw, 1x 3/8" mounting screw, 2x v-mount battery, 1x hard case
*Additional Receiver & Sony NP-F batteries available for rental.