Slider K7 (100cm)

$40 / 1st day rental


Featuring three roller bearings that ride along chrome-plated 8mm rails, the 39.4" (100 cm) long Konova K7 Slider provides smooth, stable, and quiet operation for loads weighing between 6.6 and 61 lb, with a maximum load capacity of 77.1 lb. The slider can be supported using a single tripod or a pair of tripods/stands thanks to 1/4"-20 threads located on the underside of the track, positioned along the center and at either end. Additionally, there are threaded holes on the sides of the slider that enable you to mount it vertically. For ground-level shooting, a pair of height and angle-adjustable legs with rubber ball feet are included that screw into the sides of the slider.

The slider carriage features a 3/8"-16 screw for attaching a fluid head or ball head, while also offering two 1/4"-20 threaded holes should you want to mount your camera or an accessory on an articulating arm. The resistance of the carriage can be dialed to taste quickly using a red friction adjustment knob, or with more finesse using a wrench to adjust tension. A metric ruler running the length of the slider makes it easy to perform precise and repeatable camera movements. Should you wish to expand the system in the future, you can choose to add an optional crank handle kit or one of the motion controller options.

Manfrotto 500A Video Head
Camera Plate Features: Sliding Balance Plate, Quick Release
Camera Plate Type: 500PLONG

Camera Mounting Screw:
1 x 1/4"-20 Male
1 x 3/8"-16 Male

Base Mount: 3/8"-16 Thread
Drag Control: Fixed
Drag Type: Fluid
Vertical Tilt: +90° to -70°
Panning Range: 360°
Independent Pan Lock: Yes
Independent Tilt Lock: Yes

Load Capacity: 11 lb / 5 kg
Dimensions: 3.74" / 9.5 cm
Weight: 2 lb / 0.9 kg

Slider
Tripod Mounting:
1/4"-20 Female Thread
3/8"-16 Female Thread

Track Length: 39.4" / 100 cm
Track Width: 2.4" / 6.0 cm
Track Height: 0.9" / 2.3 cm
Weight: 9.8 lb / 4.4 kg