The Tilta Nucleus-M Wireless Lens Control` System features a 1000' transmission range, and comes with two lens drive motors with built-in wireless receivers, a FIZ hand controller. The lens drive motors each feature a cine standard 0.8 MOD drive gear and two 7-pin connectors, which enables you to freely swap or interchange each motor. The motors power by daisy-chaining using the 7-pin cables, and each motor includes a 19mm rod clamp with 19 to 15mm reducing bushing.
Custom stops or lenses without hard stops
Go to A point, press and hold 'mark' until it vibrates twice. Next go to B point and press 'mark' again.
Press and hold ' Delete' to remove the AB points.
Note: The 2 handgrips are not included in our rental package.
Tilta Nucleus-M FIZ Hand Unit
Operating Frequency: 2.4 GHz
Maximum Transmission Distance: 492 to 984' / 150 to 300 m
Transmission Channels: 15
Battery Type: 18650
Dimensions: 5.6 x 3.6 x 2.8" / 142.0 x 90.5 x 70 mm
Weight: 15 oz / 430 g
Tilta Nucleus-M FIZ Lens Control Motor
Gear Mod: 0.8
Gear Pitch: 32
Number of Gear Teeth: 35
Face Width: 0.4" / 10 mm
Operating Frequency: 2.4 GHz
Maximum Range: 1640' / 500 m (unobstructed)
Rod Compatibility: 19, 15 mm
Dimensions: 4.50 x 3.25 x 1.38" / 11.43 x 8.26 x 3.49 cm
Weight: 6.7 oz / 190 g (motor only)
1x Focus Wheel
2x Drive Motors
2x Rubber Lens Gears
2x Follow Focus Marking Disk
1x D-tap to Lemo Cable
1x Lemo to Lemo Cable
4x 18650 Batteries
1x V-mount Battery
1x 18650 Battery Charger
1x Lanyard
1x Nucleus Hardshell Waterproof Case